Important Receiver Firmware Flashing Guide
How to Flash via USB:
- Format your USB Flash Drive to FAT32 format.
- Copy the downloaded .bin file to the root directory of the USB.
- Plug USB into receiver port & go to Menu > System > Software Upgrade > USB Upgrade.
- Select the .bin file, choose "All Code" or "Software", and press OK.
- CRITICAL: Do NOT turn off the power during the flashing progress. Wait until the box automatically restarts.
Check Board ID Before Flashing:
Always open your receiver top cover and confirm the motherboard printed number (e.g. GX6605S-HW603 or CS8001). Flashing an incorrect motherboard file may cause the receiver to stay stuck on red light boot.
Stuck on Red Light? Send your motherboard photo on WhatsApp +91 814061 3555 for recovery dump guidance.